Generation
Aston Martin DBX 2020–present
Change| Front | Rear | |
|---|---|---|
| Bolt pattern PCD | 5x128 5 mounting holes on a 128 mm pitch circle | 5x128 5 mounting holes on a 128 mm pitch circle |
| Centre bore DIA | 75.1 millimetres | 57.1 millimetres |
| Wheel offset | — mm | — mm |
| Fasteners | M14x1.50 Bolt | M14x1.50 Bolt |
| Tightening torque | 150 N·m | 150 N·m |
| Tyre pressure | — | — |
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
Front
- 285/40R22
Rear
- 325/35R22
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- DBX, 2020–2024, standard version285/40 ZR22 (110Y)325/35 ZR22 (114Y)22×10J ET35 / 22×11.5J ET45I can’t reliably confirm the pressure values by axle and load conditions for the standard version.
- DBX707, from 2022285/40 ZR22 (110Y)325/35 ZR22 (114Y)22×10J ET35 / 22×11.5J ET45Unconfirmed.
- DBX707, selected trim levels285/35 ZR23 (107Y)325/30 ZR23 (109Y)23×10J / 23×11.5J; offset unconfirmedUnconfirmed.
- DBX707 AMR24, 2024285/35 ZR23 (107Y)325/30 ZR23 (109Y)23-inch; width and offset unconfirmedUnconfirmed.
Vehicles with the same PCD and centre bore
Front
Exact match: 5x128 and 75.1 mm
- Aston Martin DB11 2016–2023 ET 48
- Aston Martin DBS Volante · Rear 2019–2024 ET 55
- Aston Martin DBS Volante · Front 2019–2024 ET 48
- Aston Martin Rapide · Rear 2009–2017 ET 48
- Aston Martin Rapide · Front 2009–2017 ET 42
- Aston Martin Rapide AMR · Rear 2018–2020 ET 48
- Aston Martin Rapide AMR · Front 2018–2020 ET 42
- Aston Martin Rapide S · Rear 2013–2018 ET 48
- Aston Martin Rapide S · Front 2013–2018 ET 42
- Aston Martin V12 Vantage · Front 2022–present ET —
- Aston Martin V12 Vantage · Rear 2022–present ET —
- Aston Martin Valour · Rear 2023–present ET —
Rear
Exact match: 5x128 and 57.1 mm
No other vehicles found.