Generation
Audi R8 2007–2015
Change| Front | Rear | |
|---|---|---|
| Bolt pattern PCD | 5x112 5 mounting holes on a 112 mm pitch circle | 5x112 5 mounting holes on a 112 mm pitch circle |
| Centre bore DIA | 57.1 millimetres | 57.1 millimetres |
| Wheel offset | ET 42 mm | ET 50 mm |
| Fasteners | M14x1.50 Bolt | M14x1.50 Bolt |
| Tightening torque | 120 N·m | 120 N·m |
| Tyre pressure | 2.5 bar | 2.7 bar |
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
Front
- 235/40R18
- 235/35R19
- 235/30R20
Rear
- 285/35R18
- 295/30R19
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- R8 Coupé, standard fitment235/40 R18 91Y / 285/35 R18 97Y8.5J×18 ET42 / 10.5J×18 ET502.2 / 2.2 bar (220 / 220 kPa; 32 / 32 psi)
- R8 Coupé, 19″235/35 R19 91Y / 295/30 R19 100Y8.5J×19 ET42 / 11J×19 ET502.2 / 2.2 bar (220 / 220 kPa; 32 / 32 psi)
- R8 V10, 19″ (some markets/years)235/35 R19 91Y / 295/30 R19 100Y8.5J×19 ET42 / 11J×19 ET50Check the vehicle placard: published pressure data depend on market and load
- R8 GT, 19″235/35 R19 91Y / 295/30 R19 100Y8.5J×19 ET42 / 11J×19 ET50Pressure depends on the market; without data for the specific placard, I do not specify it
Vehicles with the same PCD and centre bore
163matchesExact match: 5x112 and 57.1 mm
- Aiways U5 2020–present ET 40
- Aiways U6 2021–present ET 40
- Audi 100 1990–1994 ET 45
- Audi A2 e-tron 2026–present ET —
- Audi A3 2020–present ET 46
- Audi A3 2012–2020 ET 50
- Audi A3 2003–2013 ET 50
- Audi A4 2004–2008 ET 42
- Audi A4 2000–2004 ET 45
- Audi A4 1994–2000 ET 45
- Audi A4 Cabriolet 2002–2009 ET 42
- Audi A6 2004–2011 ET 42
