Generation
Audi RS3 2011–2015
Change
Bolt pattern PCD
5x112
5 mounting holes on a 112 mm pitch circle
Centre bore DIA
57.1
millimetres
Wheel offset
ET 50
mm
Fasteners
M14x1.50
Bolt
Tightening torque
120
N·m
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- 225/40R18
- 235/40R18
- 225/35R19
- 235/35R19
- 225/30R20
- 235/30R20
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- For the first RS3 8P (2011–2012; in some catalogues, the model period is listed as 2011–2013), the standard fitment is 225/35 R19 88Y XL front and rear, on 8J×19 ET50 wheels. The data below may not apply to versions/markets with different factory fitments: check the pressure label on the specific vehicle.
- Normal load, normal speed260 kPa / 2.6 bar / 37.7 psi
- Full load, normal speed290 kPa / 2.9 bar / 42.1 psi
Vehicles with the same PCD and centre bore
163matchesExact match: 5x112 and 57.1 mm
- Aiways U5 2020–present ET 40
- Aiways U6 2021–present ET 40
- Audi 100 1990–1994 ET 45
- Audi A2 e-tron 2026–present ET —
- Audi A3 2020–present ET 46
- Audi A3 2012–2020 ET 50
- Audi A3 2003–2013 ET 50
- Audi A4 2004–2008 ET 42
- Audi A4 2000–2004 ET 45
- Audi A4 1994–2000 ET 45
- Audi A4 Cabriolet 2002–2009 ET 42
- Audi A6 2004–2011 ET 42
