Generation

BMW M3 2000–2006

Change

Bolt pattern PCD 5x120 5 mounting holes on a 120 mm pitch circle

Centre bore DIA 72.5 millimetres

Wheel offset ET 25 mm

Fasteners M12x1.50 Bolt

Tightening torque 120 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

Coupé, standard 18″, many markets225/45 ZR18 95Y XL; 8J×18, ET47255/40 ZR18 99Y XL; 9J×18, ET26Normal load: 220/240 kPa (2.2/2.4 bar; 32/35 psi)
Coupé, optional 19″225/40 ZR19 89Y; 8J×19, ET47255/35 ZR19 96Y XL; 9.5J×19, ET27Values for this combination appear on the placards, but they vary by market/year; without the specific vehicle’s placard, I cannot state them with confidence.
Convertible, standard 18″225/45 ZR18 95Y XL; 8J×18, ET47255/40 ZR18 99Y XL; 9J×18, ET26Pressure depends on market and full load; check the vehicle’s placard
CSL (2003–2004, separate version)225/40 ZR19 89Y; 8.5J×19, ET44255/35 ZR19 96Y XL; 9.5J×19, ET27Values for the CSL should not be carried over from the standard M3; the CSL placard is required

Exact match: 5x120 and 72.5 mm

Show all