wheelatlas.cc
EnglishEN
BMW Z3 1995–2002

Generation

BMW Z3 1995–2002

Change
Bolt pattern PCD 5x120 5 mounting holes on a 120 mm pitch circle
Centre bore DIA 72.5 millimetres
Wheel offset ET 42 mm
Fasteners M12x1.50 Bolt
Tightening torque 120 N·m
Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

  • 225/50 R16
  • 225/45 R17
  • 245/40 R17

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. Standard Z3, 15″205/60 R15 91V6.5J×15, ET42Reference tables show 200/220 kPa (2.0/2.2 bar; 29/32 psi) for normal load; the value depends on the engine and market
  2. Standard Z3, 16″, staggered widths225/50 R16 92V front; 245/45 R16 94V rear7.5J×16 ET41; 8.5J×16 ET41I can’t reliably confirm a single pressure for all versions
  3. Z3 with staggered 17″ wheels225/45 R17 91W front; 245/40 R17 91W rear7.5J×17 ET41; 8.5J×17 ET41The specific vehicle’s placard is required; there is no single confirmed value
  4. M Roadster / M Coupe, early versions225/45 ZR17 91W front; 245/40 ZR17 91W rear7.5J×17 ET41; 9J×17 ET8Pressure depends on year and market; check the placard
  5. M Roadster / M Coupe, later versions225/45 ZR17 91W front; 245/40 ZR17 91W rear7.5J×17 ET41; 9J×17 ET8Do not transfer values from the standard Z3

Vehicles with the same PCD and centre bore

72matches

Exact match: 5x120 and 72.5 mm

Show all