Generation

Chevrolet Corvette 1997–2004

Change

Bolt pattern PCD 5x120.65 5 mounting holes on a 120.65 mm pitch circle

Centre bore DIA 70.3 millimetres

Wheel offset ET 56 mm

Fasteners M12x1.50 Nut

Tightening torque 140 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

For the Corvette C5 (model years 1997–2004), the standard fitment for ordinary road versions is 245/45ZR17 at the front and 275/40ZR18 at the rear. The standard pressures are listed below—for cold tyres, under normal load; these are not calculated from the wheel size. Pressures and indices may have varied by market and specific trim—check the vehicle placard.
1997–2004, coupé and convertible, standard versions245/45ZR17 95Y / 275/40ZR18 99Y17×8.5″, ET 56 mm / 18×9.5″, ET 65 mm207 kPa / 2.07 bar / 30 psi — both ends
1999–2000, FRC245/45ZR17 95Y / 275/40ZR18 99Y17×8.5″, ET 56 mm / 18×9.5″, ET 65 mm207 kPa / 2.07 bar / 30 psi — both ends
2001–2004, Z06265/40ZR17 96Y / 295/35ZR18 99Y17×9.5″, ET 54 mm / 18×10.5″, ET 58 mm207 kPa / 2.07 bar / 30 psi — both ends

Exact match: 5x120.65 and 70.3 mm

Show all