Generation
Daihatsu Mira Gino 2004–2008
Change
Bolt pattern PCD
4x100
4 mounting holes on a 100 mm pitch circle
Centre bore DIA
54.1
millimetres
Wheel offset
ET 40
mm
Fasteners
M12x1.50
Nut
Tightening torque
103
N·m
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- If you mean the Mira Gino L650S/L660S (2004), the factory size is usually listed as 155/65 R14 75S, with a 14×4.5J wheel and +45 mm offset. Cold tyre pressure depends on the version and market; I cannot confirm a reliable value without the vehicle’s placard or the manual for the specific trim.
Vehicles with the same PCD and centre bore
110matchesExact match: 4x100 and 54.1 mm
- Aston Martin Cygnet 2011–2013 ET 45
- Citroen C1 2014–2022 ET 35
- Citroen C1 2005–2014 ET 40
- Daihatsu Charade 1993–2000 ET 45
- Daihatsu Charade 1987–1993 ET 45
- Daihatsu Copen 2002–2012 ET 45
- Daihatsu Cuore 2007–2012 ET 40
- Daihatsu Cuore 2003–2007 ET 40
- Daihatsu Cuore 1999–2002 ET 40
- Daihatsu Hijet 2004–2021 ET 40
- Daihatsu Hijet 1999–2004 ET 40
- Daihatsu Materia 2006–2015 ET 40