Generation

Fiat Croma 2005–2010

Change

Bolt pattern PCD 5x110 5 mounting holes on a 110 mm pitch circle

Centre bore DIA 65.1 millimetres

Wheel offset ET 41 mm

Fasteners M12x1.50 Bolt

Tightening torque 120 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

205/55 R16 91V6.5J×16, ET41front: 230 kPa / 2.3 bar / 33 psi; rear: 210 kPa / 2.1 bar / 30 psi
215/50 R17 91W7J×17, ET41front: 230 kPa / 2.3 bar / 33 psi; rear: 210 kPa / 2.1 bar / 30 psi
225/45 R18 91W7.5J×18, ET41front: 230 kPa / 2.3 bar / 33 psi; rear: 210 kPa / 2.1 bar / 30 psi
205/55 R16 91V6.5J×16, ET41I can’t reliably confirm a single value: specifications vary by engine and load
215/50 R17 95W XL7J×17, ET41I cannot reliably confirm one value: specifications vary by engine and load

Exact match: 5x110 and 65.1 mm

Show all