Generation

Ford Puma 1997–2001

Change

Bolt pattern PCD 4x108 4 mounting holes on a 108 mm pitch circle

Centre bore DIA 63.4 millimetres

Wheel offset ET 43 mm

Fasteners M12x1.50 Nut

Tightening torque 85 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

185/55 R14 80H6J×14, ET34200/180 kPa (2.0/1.8 bar; 29/26 psi)230/250 kPa (2.3/2.5 bar; 33/36 psi)
195/50 R15 82V6J×15, ET34200/180 kPa (2.0/1.8 bar; 29/26 psi)230/250 kPa (2.3/2.5 bar; 33/36 psi)
205/40 R17 80W7J×17, ET34exact factory pressure for this combination is unverifiedunverified
185/55 R14 was found on early versions, 195/50 R15 on later versions and certain trim levels; 205/40 R17 was fitted on some versions/markets. Year and trim level matter: wheel size alone does not make it possible to determine the pressure. The indices above are for common factory specifications; check them against the manual and the tyre markings/vehicle placard.

Exact match: 4x108 and 63.4 mm

Show all