wheelatlas.cc
EnglishEN
Holden Captiva 2006–2018

Generation

Holden Captiva 2006–2018

Change
Bolt pattern PCD 5x115 5 mounting holes on a 115 mm pitch circle
Centre bore DIA 70.3 millimetres
Wheel offset ET 46 mm
Fasteners M12x1.50 Nut
Tightening torque —
Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

  • 215/70R16
  • 235/60R17
  • 235/55R18
  • 245/45R19
  • 245/40R20

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. Australia, Captiva CG 2006–2011, 17″235/60 R17 102H7J×17, offset ET46Front 220 kPa / 2.2 bar / 32 psi; rear 220 kPa / 2.2 bar / 32 psi
  2. Australia, Captiva CG, 18″235/55 R18 100H7J×18, ET46Front 220 kPa / 2.2 bar / 32 psi; rear 220 kPa / 2.2 bar / 32 psi
  3. Australia, Captiva Series II/CG, 19″ (some trims)235/50 R19 99V7J×19, ET46The exact value depends on the year/trim; I do not specify it without the vehicle’s placard
  4. Europe, Captiva C100/C140, common fitment235/60 R17 102H7J×17; offset depends on the versionPressure depends on the engine, load and market; not specified without reference to a specific version

Vehicles with the same PCD and centre bore

56matches

Exact match: 5x115 and 70.3 mm

Show all