wheelatlas.cc
EnglishEN
Holden Commodore VF 2013–2017

Generation

Holden Commodore VF 2013–2017

Change
Bolt pattern PCD 5x120 5 mounting holes on a 120 mm pitch circle
Centre bore DIA 66.9 millimetres
Wheel offset ET 45 mm
Fasteners —
Tightening torque —
Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. 225/55 R17 97V17×7.5″, ET unknownFront 240 kPa / 2.4 bar / 35 psi; rear 240 kPa / 2.4 bar / 35 psi
  2. 245/45 R18 100V18×8″, ET unknownFront 240 kPa / 2.4 bar / 35 psi; rear 240 kPa / 2.4 bar / 35 psi
  3. 245/40 R19 98Y19×8″, ET unknownFront 240 kPa / 2.4 bar / 35 psi; rear 240 kPa / 2.4 bar / 35 psi
  4. 245/35 R20 95Y20×8.5″, ET unknownConfirmed pressure for this trim has not been established

Vehicles with the same PCD and centre bore

9matches

Exact match: 5x120 and 66.9 mm