Generation
Honda Civic 1983–1987
Change
Bolt pattern PCD
4x100
4 mounting holes on a 100 mm pitch circle
Centre bore DIA
56.1
millimetres
Wheel offset
ET 45
mm
Fasteners
M12x1.50
Nut
Tightening torque
108
N·m
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- For the common North American specification of the 1984–1987 Civic 3-door, the manuals usually list 165/70R13 79S tyres and cold tyre pressure of 180 kPa / 1.8 bar / 26 psi at the front and rear. This value cannot automatically be applied to other years and versions. I cannot reliably confirm the standard wheel width and offset for this combination without the exact variant.
Vehicles with the same PCD and centre bore
64matchesExact match: 4x100 and 56.1 mm
- Citroen C-Zero 2010–2020 ET 35
- Daihatsu Applause 1989–2000 ET 45
- Daihatsu Gran Move 1997–2002 ET 45
- Daihatsu Move L901 1999–2003 ET 45
- Honda Accord 1985–1989 ET 45
- Honda Accord 1981–1985 ET 45
- Honda Civic 2001–2006 ET 45
- Honda Civic 1995–2001 ET 45
- Honda Civic 1991–1995 ET 45
- Honda Civic 1987–1991 ET 45
- Honda Concerto 1991–1994 ET 45
- Honda CRX 1992–1999 ET 45
