wheelatlas.cc
Hyundai Accent 2006–2011

Generation

Hyundai Accent 2006–2011

Change
Bolt pattern PCD 4x100 4 mounting holes on a 100 mm pitch circle
Centre bore DIA 54.1 millimetres
Wheel offset ET 46 mm
Fasteners M12x1.50 Nut
Tightening torque 100 N·m
Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

  • 175/70R14
  • 185/65R14
  • 185/60R15
  • 195/50R16
  • 215/40R17
  • 215/35R18

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. North America, most trims 2006–2011175/70R14 84T5J×14, ET46207 kPa / 2.07 bar / 30 psi
  2. North America, trims with 16″ wheels205/45R16 87V6J×16, ET52207 kPa / 2.07 bar / 30 psi
  3. Europe and some other markets, 14″175/70R14; the index depends on the homologation and tyre5J×14, ET46 — for some trim levelsThe pressure cannot be reliably established without a specific market/version
  4. Europe and some other markets, 15″185/65R15; the index depends on the homologation and tyre5.5J×15, ET46 — for some trim levelsPressure cannot be reliably determined without a specific market/version
  5. For North American variants, above 207 kPa is specified as the standard pressure under normal load; separate requirements for full load and high speed depend on the version and market. Load/speed indices and pressure for European sizes cannot be reliably generalised without the specific variant: use the factory sticker or manual for that variant.

Vehicles with the same PCD and centre bore

110matches

All generations of the model