wheelatlas.cc
EnglishEN
Hyundai i40 2011–2019

Generation

Hyundai i40 2011–2019

Change
Bolt pattern PCD 5x114.3 5 mounting holes on a 114.3 mm pitch circle
Centre bore DIA 67.1 millimetres
Wheel offset ET 46 mm
Fasteners M12x1.50 Nut
Tightening torque 100 N·m
Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

  • 205/60R16
  • 215/50R17
  • 225/45R18
  • 225/40R19
  • 245/35R19
  • 245/30R20

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. 205/60 R16 92V6.5J×16, ET46
  2. 215/50 R17 95V7.0J×17, ET46
  3. 225/45 R18 91W7.5J×18, ET46
  4. Pressure: it is not possible to reliably specify separate values for all these sizes, years and markets without the data from the specific placard. Manuals for some i40 versions state 230 kPa (2.3 bar; 33 psi) at the front and rear under normal load; requirements may differ under full load or at high speed. Use the values on the vehicle placard for cold tyres — pressure should not be determined by wheel size.

Vehicles with the same PCD and centre bore

201matches

Exact match: 5x114.3 and 67.1 mm

Show all