Generation · M35/M45 (Y50)

Infiniti M35/M45 2004–2010

Change

Bolt pattern PCD 5x114.3 5 mounting holes on a 114.3 mm pitch circle

Centre bore DIA 66.1 millimetres

Wheel offset ET 40 mm

Fasteners M12x1.25 Nut

Tightening torque —

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

North America, early years, 18″245/45R18 96W18×8J, offset +40 mm230 kPa / 2.3 bar / 33 psi
North America, trims with 19″245/40R19 94W19×8J, offset +40 mm230 kPa / 2.3 bar / 33 psi
Japan, M35/M45; certain trim levels245/45R18 96W18×8J; offset depends on the specificationPressure should be taken from the plate on the specific vehicle
2006–2010, North America, M35/M35x, base trims245/45R18
2006–2010, North America, M35/M35x, some trim levels245/45R18 96V18×8J, ET +30 mm230 / 230 kPa = 2.3 / 2.3 bar = 33 / 33 psi
2006–2010, North America, M45, some trims245/45R18 96V18×8J, ET +30 mm230 / 230 kPa = 2.3 / 2.3 bar = 33 / 33 psi
2005–2010, Europe/some other markets, M35/M45245/45R18 100W XL — a common option18×8J; offset depends on market/trim, the exact value is unconfirmedPressure depends on version and load; cannot be reliably specified without the vehicle placard

Exact match: 5x114.3 and 66.1 mm

Show all