Generation
Jeep Grand Cherokee SRT 2011–2021
Change
Bolt pattern PCD
5x127
5 mounting holes on a 127 mm pitch circle
Centre bore DIA
71.5
millimetres
Wheel offset
ET 50
mm
Fasteners
—
Tightening torque
136
N·m
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- 265/50R20
- 295/45R20
- 295/35R22
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- For the WK2-generation Grand Cherokee SRT, the standard main combination is 295/45 ZR20 110Y XL on a 20×10J wheel, with an ET50.8 mm offset. In the manuals for the SRT, the specified pressure for this combination is 248 kPa / 2.48 bar / 36 psi with cold tyres. The pressure is the same at the front and rear.
- 2012–2021, USA/Canada295/45 ZR20 110Y XL20×10J, ET50.8 mm (ET2.0″)248 kPa / 2.48 bar / 36 psi
- 2012–2021, Europe and other markets — where this combination is specified by the manufacturer295/45 ZR20 110Y XL20×10J; offset may depend on homologation — there is no single verified value for all markets248 kPa / 2.48 bar / 36 psi