Generation

Jeep Liberty 2001–2007

Change

Bolt pattern PCD 5x114.3 5 mounting holes on a 114.3 mm pitch circle

Centre bore DIA 71.6 millimetres

Wheel offset ET 42 mm

Fasteners 1/2-20 UNF Nut

Tightening torque —

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

2002–2004, standard trimsP235/70R16 104S16×7J, offset +40 mm
2002–2004, LimitedP235/65R17 103S17×7J, offset +40 mm
2005–2007, standard trim levelsP225/75R16 104S16×7J, offset +40 mm
2005–2007, LimitedP235/65R17 103S17×7J, offset +40 mm
Certain versions/markets and packagesP235/70R16 or P245/70R16; indices depend on the specific tyreUsually 16×7J; check the exact size on the vehicle specification plate
For the North American variants specified, 240 kPa / 2.4 bar / 35 psi is usually quoted for both the front and rear at normal load. This is not a universal value for all model years and markets: at full load, high speed or with a different standard tyre, follow the vehicle placard/manual. For alternative sizes, the pressure cannot be reliably determined without such a specification.

Exact match: 5x114.3 and 71.6 mm

Show all