Generation

Kia Magentis 2000–2006

Change

Bolt pattern PCD 4x114.3 4 mounting holes on a 114.3 mm pitch circle

Centre bore DIA 67.1 millimetres

Wheel offset ET 45 mm

Fasteners M12x1.50 Nut

Tightening torque 100 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

2001–2005, North America, base versionsP205/60R15 91H6J×15, ET46front/rear 207 kPa / 2.07 bar / 30 psi
2001–2005, North America, certain trim levelsP205/55R16 89H6.5J×16, ET46front/rear 207 kPa / 2.07 bar / 30 psi
2001–2005, Europe/other markets, base versions205/60R15 91H6J×15, ET46pressure is not reliably specified in the available specifications
2001–2005, Europe/other markets, certain versions205/55R16 91V6.5J×16, ET46pressure not reliably specified
The 30 psi pressure applies to normal load; values may differ for a full load and high speed — check the vehicle’s placard or the manual for its specific market and trim. In some markets, the Magentis was sold as the Optima, and specifications may have differed.

Exact match: 4x114.3 and 67.1 mm

Show all