
Generation
Lada Samara 1984–2013
Change
Bolt pattern PCD
4x98
4 mounting holes on a 98 mm pitch circle
Centre bore DIA
58.1
millimetres
Wheel offset
ET 40
mm
Fasteners
—
Tightening torque
—
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- 165/70R13
- 175/70R13
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- Samara 2108/2109/21099, standard versions165/70 R13 79S5J×13, ET35Front: 190 kPa (1.9 bar; 27.6 psi); rear: 190 kPa (1.9 bar; 27.6 psi)
- Some later/export versions175/70 R13 82T5J×13, ET35I cannot reliably confirm a separate standard pressure for this size
- Certain versions/markets155/80 R13 — the index depends on the supply5J×13, ET35I cannot reliably confirm the standard tyre pressure
- The values 79S and 82T denote the load and speed indices, respectively. The pressure of 190 kPa applies to the common 165/70 R13 specification; it must not be applied to other tyres or markets without checking the vehicle’s placard. Refer to the pressure sticker on the vehicle or the manual for its specific year and trim: separate values may be given for full load and high speed. I am deliberately not reconstructing unspecified data from the wheel size.
Vehicles with the same PCD and centre bore
74matchesExact match: 4x98 and 58.1 mm
- Abarth 500e 2023–present ET 40
- Abarth 595 2022–present ET 38
- Abarth 595 2016–2022 ET 38
- Alfa Romeo 145 1994–2000 ET 40
- Alfa Romeo 146 1995–2000 ET 40
- Alfa Romeo 155 1992–1997 ET 40
- Alfa Romeo 164 1987–1998 ET 40
- Alfa Romeo 33 1983–1995 ET 40
- Alfa Romeo 90 1984–1987 ET 40
- Alfa Romeo Alfasud 1971–1983 ET 40
- Alfa Romeo Alfetta 1972–1984 ET 40
- Alfa Romeo Alfetta GT 1974–1987 ET 40