
Generation
Lamborghini Gallardo Spyder 2006–2013
Change
Bolt pattern PCD
5x112
5 mounting holes on a 112 mm pitch circle
Centre bore DIA
57.1
millimetres
Wheel offset
ET 0
mm
Fasteners
M14x1.50
Bolt
Tightening torque
—
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- 235/35R19
- 295/30R19
- 235/30R20
- 295/25R20
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- Spyder, early model yearsFront 235/35 ZR19 91Y; rear 295/30 ZR19 100YFactory data on width and offset are not specified in the available manual2.2 bar front (220 kPa / 31.9 psi); 2.2 bar rear (220 kPa / 31.9 psi)
- Spyder, later versions, including LP 560-4A front size of 235/35 ZR19 and a rear size of 295/30 ZR19 are found; index applicability depends on the homologation of the specific vehicleThe complete set of wheel width and offset could not be reliably confirmed against the factory specificationThe value depends on the vehicle’s placard; without its details, the exact pressure for this version cannot be confirmed
Vehicles with the same PCD and centre bore
163matchesExact match: 5x112 and 57.1 mm
- Aiways U5 2020–present ET 40
- Aiways U6 2021–present ET 40
- Audi 100 1990–1994 ET 45
- Audi A2 e-tron 2026–present ET —
- Audi A3 2020–present ET 46
- Audi A3 2012–2020 ET 50
- Audi A3 2003–2013 ET 50
- Audi A4 2004–2008 ET 42
- Audi A4 2000–2004 ET 45
- Audi A4 1994–2000 ET 45
- Audi A4 Cabriolet 2002–2009 ET 42
- Audi A6 2004–2011 ET 42