Generation

Mazda Mazda2 2003–2007

Change

Bolt pattern PCD 4x108 4 mounting holes on a 108 mm pitch circle

Centre bore DIA 63.4 millimetres

Wheel offset ET 47 mm

Fasteners M12x1.50 Nut

Tightening torque 85 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

Europe, most trim levels175/65 R14 82T5.5J×14, ET45Usually 220 kPa / 2.2 bar / 32 psi — front and rear
Europe, certain trims185/55 R15 82V6J×15, ET45The pressure for this size depends on the version; it cannot be stated reliably without the vehicle’s information plate
Japan, Demio175/65 R14 82S5.5J×14, ET45Value depends on the engine and load; see the vehicle placard
North America, Mazda2 2007185/55 R15 82V6J×15; the standard offset depends on the trimPressure depends on the version and load conditions; see the vehicle placard

Exact match: 4x108 and 63.4 mm

Show all