wheelatlas.cc
Mitsubishi L300 1986–1994

Generation

Mitsubishi L300 1986–1994

Change
2WD4WD
Bolt pattern PCD 5x114.3 5 mounting holes on a 114.3 mm pitch circle6x139.7 6 mounting holes on a 139.7 mm pitch circle
Centre bore DIA 67.1 millimetres107.4 millimetres
Wheel offset ET 40 mmET 27 mm
Fasteners M12x1.50 NutM12x1.50 Nut
Tightening torque ——
Tyre pressure ——

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. 185R14-6PR (radial, 6-ply; speed index usually not specified)5J×14, offset not confirmed in available specificationsNot specified: the value depends on the version and load
  2. 195R14-6PR (radial, 6-ply; speed index usually not specified)5J×14, offset unconfirmedNot specified: the value depends on the version and load
  3. 185R14C — found in some markets; the load/speed index depends on the specific tyreUsually 5J×14; offset unconfirmedNot specified without the market and the vehicle's information plate
  4. For tyres marked R without a profile, this is an old commercial designation, not a modern size such as “185/80 R14”; you cannot assign it that size or load/speed indices. I also cannot reliably confirm a single standard offset, or different pressures by axle and load conditions, for the entire 1986–1994 range. The year, market, body/load capacity, or a photo of the door-jamb label is needed to provide exact values in kPa, bar and psi.

Vehicles with the same PCD and centre bore

All generations of the model