wheelatlas.cc
EnglishEN
Mitsubishi Pajero Pinin 2000–2007

Generation

Mitsubishi Pajero Pinin 2000–2007

Change
Bolt pattern PCD 5x114.3 5 mounting holes on a 114.3 mm pitch circle
Centre bore DIA 67.1 millimetres
Wheel offset ET 46 mm
Fasteners M12x1.50 Nut
Tightening torque 130 N·m
Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

  • 215/65R16

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. European 1.8/2.0, 2000–2007, 5-door215/65 R16 98H6J×16, ET46Front 200 kPa (2.0 bar / 29 psi); rear 200 kPa (2.0 bar / 29 psi)
  2. European 1.8, 2000–2007, 3-door215/65 R16 98H6J×16, ET46Front 200 kPa (2.0 bar / 29 psi); rear 200 kPa (2.0 bar / 29 psi)
  3. The data above should not be applied to other markets, trim levels or placards with different sizes. In particular, without specifying the market and version, additional sizes (for example, 205/70 R15), their indices, wheel offset and the corresponding pressure cannot be reliably confirmed for the entire generation. Give priority to the pressure placard on the vehicle and the manual for its specific market and year; for full load or high speed, follow the separate values specified there.

Vehicles with the same PCD and centre bore

201matches

Exact match: 5x114.3 and 67.1 mm

Show all