Generation
Mitsubishi Pajero 2006–2021
Change
Bolt pattern PCD
6x139.7
6 mounting holes on a 139.7 mm pitch circle
Centre bore DIA
67.1
millimetres
Wheel offset
ET 46
mm
Fasteners
M12x1.50
Nut
Tightening torque
115
N·m
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- 265/70 R16 112S
- 265/65 R17
- 265/60 R18 110H
- 265/50 R20
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- 265/65 R17 112S7.5J×17, ET46For some versions and markets, 200 kPa / 2.0 bar / 29 psi is specified at the front and rear; check the vehicle placard
- 265/60 R18 110H7.5J×18, ET46No reliable single value has been established for all markets — see the vehicle placard
- 265/70 R16 112S7J×16, ET46Depends on market and trim; without the data from the placard, I do not state a value
- Sizes 265/65 R17 and 265/60 R18 appear in factory specifications for different markets/trim levels; a 16-inch option was also used on certain versions. Load and speed indices may have varied by market and tyre model: check the manual or the plate on the door pillar, not just the size.
Vehicles with the same PCD and centre bore
7matchesExact match: 6x139.7 and 67.1 mm
