Generation
Nissan Qashqai 2013–2022
Change
Bolt pattern PCD
5x114.3
5 mounting holes on a 114.3 mm pitch circle
Centre bore DIA
66.1
millimetres
Wheel offset
ET 40
mm
Fasteners
M12x1.50
Bolt
Tightening torque
113
N·m
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- 215/65R16
- 215/60R17
- 215/55R18
- 235/50R18
- 225/45R19
- 245/40R20
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- J11, 215/65 R16 98H16×6.5J, ET40usually 230/230 kPa (2.3/2.3 bar; 33/33 psi)market-dependent; check the placard
- J11, 215/60 R17 96H17×7J, ET40usually 230/230 kPa (2.3/2.3 bar; 33/33 psi)depends on market; check the placard
- J11, 215/55 R18 95H18×7J, ET40usually 230/230 kPa (2.3/2.3 bar; 33/33 psi)depends on market; check the placard
- J11, 225/45 R19 92W — certain markets/trim levels19×7J, ET40a verified value cannot be specified without data for the specific market—
Vehicles with the same PCD and centre bore
113matchesExact match: 5x114.3 and 66.1 mm
- Alpine A110 · Rear 2017–2026 ET 40
- Alpine A110 · Front 2017–2026 ET 30
- Dacia Bigster 2025–present ET 32
- Dacia Duster 2017–present ET 50
- Dacia Duster 2010–2017 ET 50
- Fiat Talento 2016–2020 ET 50
- Infiniti EX 25,35,37,30d 2007–2014 ET 50
- Infiniti FX 30,35,37,45,50 2008–2014 ET 45
- Infiniti FX 30,35,37,45,50 2002–2008 ET 35
- Infiniti G25 2007–2015 ET 47
- Infiniti G35 2003–2007 ET 24
- Infiniti G37 Coupe 2007–2015 ET 24
