Generation
Nissan Serena 1993–2000
Change
Bolt pattern PCD
5x114.3
5 mounting holes on a 114.3 mm pitch circle
Centre bore DIA
66.1
millimetres
Wheel offset
ET 40
mm
Fasteners
M12x1.25
Nut
Tightening torque
108
N·m
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- 195/70 R14
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- For the Japanese-market Serena C23, catalogues usually list size 195/70 R14 91S on a 14×5.5J wheel, with +40 mm offset. This does not confirm that this size was standard on all versions and years. I cannot specify the factory pressure for this size here without the vehicle placard or the manual for the specific version — it cannot be calculated from the wheel size.
Vehicles with the same PCD and centre bore
113matchesExact match: 5x114.3 and 66.1 mm
- Alpine A110 · Rear 2017–2026 ET 40
- Alpine A110 · Front 2017–2026 ET 30
- Dacia Bigster 2025–present ET 32
- Dacia Duster 2017–present ET 50
- Dacia Duster 2010–2017 ET 50
- Fiat Talento 2016–2020 ET 50
- Infiniti EX 25,35,37,30d 2007–2014 ET 50
- Infiniti FX 30,35,37,45,50 2008–2014 ET 45
- Infiniti FX 30,35,37,45,50 2002–2008 ET 35
- Infiniti G25 2007–2015 ET 47
- Infiniti G35 2003–2007 ET 24
- Infiniti G37 Coupe 2007–2015 ET 24