Generation
Oldsmobile Toronado 1978–1985
Change
Bolt pattern PCD
5x120.65
5 mounting holes on a 120.65 mm pitch circle
Centre bore DIA
70.3
millimetres
Wheel offset
ET 0
mm
Fasteners
M12x1.50
Nut
Tightening torque
—
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- P205/75R15
- P225/70R15
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- For the 1979–1985 Oldsmobile Toronado (not Tornado), the standard size is P205/75R15, but tables for different years and markets give different pressure values. Without the year and market, it is not possible to reliably provide a single table covering all versions. The data below is for the standard North American version; pressure is specified for cold tyres.
- 1979–1981P205/75R15, radial15×6J; offset unverified24/24 psi (165/1.65 bar)
- 1982–1985P205/75R15, radial15×6J; offset unconfirmed26/26 psi (179/1.79 bar)
Vehicles with the same PCD and centre bore
61matchesExact match: 5x120.65 and 70.3 mm
- Buick Century 1977–1981 ET 0
- Buick Regal 1978–1987 ET 0
- Buick Regal 1973–1977 ET 0
- Buick Skylark 1975–1979 ET 0
- Buick Skylark 1968–1972 ET 0
- Cadillac Seville 1980–1985 ET 10
- Cadillac XLR 2003–2009 ET 61
- Chevrolet Bel Air 1977–1981 ET 0
- Chevrolet Bel Air 1964–1970 ET 0
- Chevrolet Bel Air 1960–1964 ET 0
- Chevrolet Bel Air 1958–1960 ET 0
- Chevrolet Bel Air 1957–1958 ET 0
