Generation

Opel Mokka 2012–2017

Change

Bolt pattern PCD 5x105 5 mounting holes on a 105 mm pitch circle

Centre bore DIA 56.6 millimetres

Wheel offset ET 39 mm

Fasteners M12x1.50 Nut

Tightening torque 140 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

205/70 R16 96H6.5J×16, ET38220 kPa / 2.2 bar / 32 psi
215/65 R16 98H6.5J×16, ET38Exact value depends on the version; check the placard
215/60 R17 96H7J×17, ET38220 kPa / 2.2 bar / 32 psi
215/55 R18 95H7J×18, ET38Exact value depends on the version; check the placard
225/45 R19 96W XL7J×19, ET38Exact value depends on the version; check the label
The stated 220 kPa should not be taken as a value for all engines or load conditions. At full load and/or high speed, Opel specifies separate values that vary by version; without the information on the placard, they cannot be stated reliably. In addition, sizes listed in catalogues for the US/Canadian market may differ from European ones.

Exact match: 5x105 and 56.6 mm

Show all