wheelatlas.cc
EnglishEN
Porsche 911 964 1989–1995

Generation

Porsche 911 964 1989–1995

Change
Bolt pattern PCD 5x130 5 mounting holes on a 130 mm pitch circle
Centre bore DIA 71.6 millimetres
Wheel offset ET 50 mm
Fasteners M14x1.50 Bolt
Tightening torque 130 N·m
Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

  • 205/55 ZR16
  • 225/50 ZR16
  • 205/50 ZR17
  • 255/40 ZR17
  • 225/40 ZR18
  • 265/35 ZR18

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. Carrera 2/4, typical early specification205/55 ZR16; 7J×16, ET55225/50 ZR16; 8J×16, ET52.3250/300 kPa — 2.5/3.0 bar — 36/44 psi
  2. Carrera 2/4, 17″205/50 ZR17; 7J×17, ET55255/40 ZR17; 9J×17, ET55Not specified: there is no reliably confirmed pressure value for this combination and market
  3. Carrera RS (1992–1994; market/homologation may have affected the specification)205/50 ZR17 / 255/40 ZR17
  4. 911 Turbo (964; 1991–1994)205/50 ZR17; 7J×17, ET55255/40 ZR17; 9J×17, ET55Not specified: the value depends on the specification for the specific market/tyre

Vehicles with the same PCD and centre bore

33matches

Exact match: 5x130 and 71.6 mm

Show all