wheelatlas.cc
EnglishEN
Porsche 911 996 Turbo 1999–2005

Generation

Porsche 911 996 Turbo 1999–2005

Change
Bolt pattern PCD 5x130 5 mounting holes on a 130 mm pitch circle
Centre bore DIA 71.6 millimetres
Wheel offset ET 52 mm
Fasteners M14x1.50 Bolt
Tightening torque 130 N·m
Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

  • 225/40 ZR18
  • 295/30 ZR18

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. In brief: for the production 996-generation 911 Turbo, the standard fitment is 225/40 ZR18 92Y tyres at the front on 8J×18 ET50 wheels; 295/30 ZR18 98Y tyres at the rear on 11J×18 ET45 wheels. For a normal load, the manual specifies 2.5 bar at the front and 3.0 bar at the rear. The pressures below are for cold tyres.
  2. 1999–2005, 911 Turbo Coupé225/40 ZR18 92Y; 8J×18, ET50295/30 ZR18 98Y; 11J×18, ET45Normal load: 250/300 kPa = 2.5/3.0 bar = 36/44 psi
  3. 2004–2005, 911 Turbo Cabriolet225/40 ZR18 92Y; 8J×18, ET50295/30 ZR18 98Y; 11J×18, ET45Normal load: 250/300 kPa = 2.5/3.0 bar = 36/44 psi

Vehicles with the same PCD and centre bore

33matches

Exact match: 5x130 and 71.6 mm

Show all