wheelatlas.cc
EnglishEN
Porsche 928 1977–1995

Generation

Porsche 928 1977–1995

Change
Bolt pattern PCD 5x130 5 mounting holes on a 130 mm pitch circle
Centre bore DIA 71.6 millimetres
Wheel offset ET 52 mm
Fasteners M14x1.50 Bolt
Tightening torque 130 N·m
Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

  • 215/60 VR15
  • 225/50 ZR16
  • 245/45 ZR16
  • 225/45 ZR17
  • 255/40 ZR17

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. Early 928, late 1970s — early 1980s215/60 VR157J×15; offset depends on year and market
  2. 928 S, 1980s225/50 ZR16
  3. Later S4 / GT / GTS, 1987–1995usually 225/50 ZR16 front; 245/45 ZR16 rear; some versions had 17-inch sets7J×16 and 8J×16 or 7.5J×17 and 9J×17; the specific offset depends on the version

Vehicles with the same PCD and centre bore

33matches

Exact match: 5x130 and 71.6 mm

Show all