Generation
Renault Megane 2008–2015
Change
Bolt pattern PCD
5x114.3
5 mounting holes on a 114.3 mm pitch circle
Centre bore DIA
66.1
millimetres
Wheel offset
ET 47
mm
Fasteners
M12x1.50
Bolt
Tightening torque
110
N·m
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- 195/65 R15 91H
- 205/55 R16 91H
- 205/50 R17 89V
- 225/40 R18
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- 195/65 R15 91H6.5J×15, ET472.2 bar (220 kPa / 32 psi) front; 2.0 bar (200 kPa / 29 psi) rear
- 205/55 R16 91H or 91V6.5J×16, ET472.2 bar (220 kPa / 32 psi) front; 2.0 bar (200 kPa / 29 psi) rear
- 205/50 R17 89V7J×17, ET492.3 bar (230 kPa / 33 psi) front; 2.1 bar (210 kPa / 30 psi) rear
- Some versions are fitted with reinforced XL tyres and other combinations, including 225/40 R18; their pressures and permitted wheels should be checked against the vehicle’s label or the manual for its specific market and variant. For full load and high speed, Renault specifies separate values — these vary by version, so they are not listed here. Specifications may differ for the Megane Coupé, RS and some diesel/off-road versions.
Vehicles with the same PCD and centre bore
113matchesExact match: 5x114.3 and 66.1 mm
- Alpine A110 · Rear 2017–2026 ET 40
- Alpine A110 · Front 2017–2026 ET 30
- Dacia Bigster 2025–present ET 32
- Dacia Duster 2017–present ET 50
- Dacia Duster 2010–2017 ET 50
- Fiat Talento 2016–2020 ET 50
- Infiniti EX 25,35,37,30d 2007–2014 ET 50
- Infiniti FX 30,35,37,45,50 2008–2014 ET 45
- Infiniti FX 30,35,37,45,50 2002–2008 ET 35
- Infiniti G25 2007–2015 ET 47
- Infiniti G35 2003–2007 ET 24
- Infiniti G37 Coupe 2007–2015 ET 24
