wheelatlas.cc
EnglishEN
Seat Leon Cupra R 2002–2006

Generation

Seat Leon Cupra R 2002–2006

Change
Bolt pattern PCD 5x100 5 mounting holes on a 100 mm pitch circle
Centre bore DIA 57.1 millimetres
Wheel offset ET 38 mm
Fasteners M14x1.50 Bolt
Tightening torque —
Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

  • 225/40 R18

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. For the SEAT León Cupra R 1M, the standard fitment is usually listed as 225/40 R18 92Y XL on 7.5J×18, ET38 wheels. In the vehicle manuals, tyre pressure depends on the load and speed; the wheel size alone does not make it possible to determine the pressure.
  2. Normal load, speed up to 160 km/h2.3 bar / 230 kPa / 33 psi2.3 bar / 230 kPa / 33 psi
  3. Full load, speed up to 160 km/h2.5 bar / 250 kPa / 36 psi2.5 bar / 250 kPa / 36 psi
  4. Full load, over 160 km/h2.7 bar / 270 kPa / 39 psi3.0 bar / 300 kPa / 44 psi

Vehicles with the same PCD and centre bore

74matches

Exact match: 5x100 and 57.1 mm

Show all