Generation

Seat Leon 2005–2010

Change

Bolt pattern PCD 5x112 5 mounting holes on a 112 mm pitch circle

Centre bore DIA 57.1 millimetres

Wheel offset ET 50 mm

Fasteners M14x1.50 Bolt

Tightening torque 120 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

205/55 R16 91V6.5J×16, ET50220 / 220 kPa (2.2 / 2.2 bar; 32 / 32 psi)240 / 280 kPa (2.4 / 2.8 bar; 35 / 41 psi)
225/45 R17 91W7J×17, ET54230 / 230 kPa (2.3 / 2.3 bar; 33 / 33 psi)260 / 300 kPa (2.6 / 3.0 bar; 38 / 44 psi)
225/40 R18 92Y XL7.5J×18, ET51250 / 250 kPa (2.5 / 2.5 bar; 36 / 36 psi)280 / 320 kPa (2.8 / 3.2 bar; 41 / 46 psi)
Sizes and indices may have differed between individual markets and versions; for example, 205/50 R17 and 225/40 R18 were used on some trim levels. Pressures for these are not specified here: they cannot be reliably determined from the tyre or wheel size alone. The Leon FR and Cupra also have separate homologations and pressure settings.

Exact match: 5x112 and 57.1 mm

Show all