Generation
Suzuki Wagon R plus 1997–2000
Change
Bolt pattern PCD
4x100
4 mounting holes on a 100 mm pitch circle
Centre bore DIA
54.1
millimetres
Wheel offset
ET 45
mm
Fasteners
M12x1.25
Bolt
Tightening torque
85
N·m
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- 155/65R13
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- For the first-generation Wagon R+ (MA61S/MA63S/MA64S; 1997–2000), the most common factory fitment is 155/65 R13 73S on 13×4.5J, ET45 wheels. The pressure on the vehicle placard is usually: front 200 kPa (2.0 bar / 29 psi), rear 180 kPa (1.8 bar / 26 psi) — for standard load.
- Japan, early MA61S/MA63S, 1997–2000155/65 R13 73S; 13×4.5J, ET45Front 200 kPa (2.0 bar / 29 psi); rear 180 kPa (1.8 bar / 26 psi)
Vehicles with the same PCD and centre bore
110matchesExact match: 4x100 and 54.1 mm
- Aston Martin Cygnet 2011–2013 ET 45
- Citroen C1 2014–2022 ET 35
- Citroen C1 2005–2014 ET 40
- Daihatsu Charade 1993–2000 ET 45
- Daihatsu Charade 1987–1993 ET 45
- Daihatsu Copen 2002–2012 ET 45
- Daihatsu Cuore 2007–2012 ET 40
- Daihatsu Cuore 2003–2007 ET 40
- Daihatsu Cuore 1999–2002 ET 40
- Daihatsu Hijet 2004–2021 ET 40
- Daihatsu Hijet 1999–2004 ET 40
- Daihatsu Materia 2006–2015 ET 40
