wheelatlas.cc
Toyota Celica 1993–1999

Generation

Toyota Celica 1993–1999

Change
Bolt pattern PCD 5x100 5 mounting holes on a 100 mm pitch circle
Centre bore DIA 54.1 millimetres
Wheel offset ET 45 mm
Fasteners M12x1.50 Nut
Tightening torque 103 N·m
Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

  • 195/55R15
  • 205/50R16
  • 215/40R17
  • 215/35R18

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

  1. 1993–1999, most US/Canada versionsP195/60R15 87H15 × 6″, ET45front/rear 220 kPa / 2.2 bar / 32 psi
  2. 1994–1999, GT, certain markets and trim levelsP205/55R15 87V15 × 6″, ET45usually 220 kPa / 2.2 bar / 32 psi; check against the placard
  3. GT-Four/ST205, markets where it was sold (1994–1999)215/50R16 90V16 × 7″, ET45exact factory tyre pressure depends on the market; cannot be stated reliably without the manual or placard
  4. Europe and other markets, certain versions195/60 R15 88H or 205/55 R15 87Vusually 15 × 6″, ET45depends on version and prescribed load
  5. 220 kPa is the usual recommendation for North American versions under normal load; at full load or high speed, the manual may prescribe otherwise. The P designation refers to North American marking. Width, offset and indices may have varied by trim; the values given do not replace the factory placard.

Vehicles with the same PCD and centre bore

17matches

All generations of the model