Generation

Toyota ProAce 2016–present

Change

Bolt pattern PCD 5x108 5 mounting holes on a 108 mm pitch circle

Centre bore DIA 65.1 millimetres

Wheel offset ET 46 mm

Fasteners M12x1.25 Bolt

Tightening torque 125 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

For the European ProAce II, catalogues list 215/65 R16C 106/104T tyres on 6.5J×16, ET46 rims and 225/55 R17C 104/102H tyres on 7J×17, ET46 rims. This does not confirm that both sizes are approved for every version. I do not give the pressures for them here: they depend on the load and should be taken from the plate on the specific vehicle or its handbook, not calculated from the rim size.

Exact match: 5x108 and 65.1 mm

Show all