Generation

Toyota Sequoia 2001–2007

Change

Bolt pattern PCD 6x139.7 6 mounting holes on a 139.7 mm pitch circle

Centre bore DIA 106 millimetres

Wheel offset ET 8 mm

Fasteners M12x1.50 Nut

Tightening torque 115 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

2001–2004, SR5 and LimitedP265/70R16 111S7J×16, offset +15 mm
2005–2007, SR5 and LimitedP265/65R17 110S7.5J×17, offset +15 mm
Cold pressure for these standard fitments: 220 kPa / 2.2 bar / 32 psi front and rear. This is for normal load; a separate pressure for full load or high speed cannot be specified without reference to a specific vehicle placard — check the sticker on the door pillar.

Exact match: 6x139.7 and 106 mm

Show all