Generation

Toyota Verso 2009–2018

Change

Bolt pattern PCD 5x114.3 5 mounting holes on a 114.3 mm pitch circle

Centre bore DIA 60.1 millimetres

Wheel offset ET 39 mm

Fasteners M12x1.50 Nut

Tightening torque 103 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

For the European Toyota Verso AR20 (2009–2018), the typical factory size is 205/60 R16 92V on a 6.5J×16, ET39 wheel. In some trim levels and markets, 215/55 R17 94W on 7J×17, ET39 is also found. The values given below are for cold tyres; check the pressure label on the specific vehicle: market, engine and load can change the recommendations.
205/60 R16 92V6.5J×16, ET39230/230 kPa (2.3/2.3 bar; 33/33 psi)250/280 kPa (2.5/2.8 bar; 36/41 psi)
215/55 R17 94W7J×17, ET39230/230 kPa (2.3/2.3 bar; 33/33 psi)250/280 kPa (2.5/2.8 bar; 36/41 psi)

Exact match: 5x114.3 and 60.1 mm

Show all