
Generation
Citroen Jumper Maxi 1994–2006
Change
Bolt pattern PCD
5x130
5 mounting holes on a 130 mm pitch circle
Centre bore DIA
78.1
millimetres
Wheel offset
ET 68
mm
Fasteners
M16x1.50
Bolt
Tightening torque
—
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- In brief: for the first-generation Jumper Maxi, the usual specification is 205/75 R16C tyres and 6J×16, ET68 wheels. However, without the year of manufacture, market, full version and vehicle placard, the standard indices and pressures cannot be reliably stated: they may have varied. In particular, pressure cannot be determined from the wheel size.
- Tyre205/75 R16C — a common size; the specific load/speed index must be checked against the placard or documents for this version
- Wheel6J×16, ET68 — a common specification; applicability to a specific trim requires verification
Vehicles with the same PCD and centre bore
12matchesExact match: 5x130 and 78.1 mm
- Citroen Jumper Maxi 2006–present ET 68
- Citroen Relay Maxi 2006–present ET 68
- Citroen Relay Maxi 1994–2006 ET 68
- Fiat Ducato Maxi 2006–present ET 68
- Fiat Ducato Maxi 1994–2006 ET 68
- Laika X650R 2007–2014 ET 68
- Laika X660R 2007–2014 ET 68
- Maxus EV80 2015–2023 ET 66
- Maxus EV80 Plus 2022–present ET 66
- Maxus EV80 Pro 2022–present ET 66
- Peugeot Boxer · Maxi 2006–present ET 68
- RAM Promaster 2013–present ET 68