Generation

Fiat Ducato Maxi 2006–present

Change

Bolt pattern PCD 5x130 5 mounting holes on a 130 mm pitch circle

Centre bore DIA 78.1 millimetres

Wheel offset ET 68 mm

Fasteners M16x1.50 Bolt

Tightening torque 160 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

For the European Fiat Ducato Maxi X250 2006–2010, the standard combination confirmed by the owner’s manual is 215/75 R16C 113/111Q on a 6J×16, ET68 wheel. These specifications are for the Maxi; specifications may vary by market and the vehicle’s specific homologation.
215/75 R16C 113/111Q6J×16, ET68front: 500 kPa / 5.0 bar / 72.5 psi; rear: 550 kPa / 5.5 bar / 79.8 psi
A commonly seen standard Maxi fitment is 225/75 R16C 116/114R on a 6J×16 wheel, ET68. This does not confirm applicability to every year and market; the pressure cannot be determined from the tyre or wheel size.

Exact match: 5x130 and 78.1 mm