Generation

Mercedes E-Klasse 1975–1986

Change

Bolt pattern PCD 5x112 5 mounting holes on a 112 mm pitch circle

Centre bore DIA 66.6 millimetres

Wheel offset ET 25 mm

Fasteners M12x1.50 Bolt

Tightening torque —

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

Tyres and wheels by version

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

175 SR 14 (usually 88S)5½J×14 H2, ET 30180 / 200 kPa (1.8 / 2.0 bar; 26 / 29 psi)
185/70 HR 14 (usually 88H)5½J×14 H2, ET 30180 / 200 kPa (1.8 / 2.0 bar; 26 / 29 psi)
195/70 HR 14 (usually 91H)6J×14 H2, ET 30180 / 200 kPa (1.8 / 2.0 bar; 26 / 29 psi)
Not all listed combinations are available for every year and market; for example, size 195/70 HR 14 was not used on all versions. The model/engine, year, market and load—or the information from the vehicle’s placard—are needed to determine the exact pressure.

Exact match: 5x112 and 66.6 mm

Show all