Generation

Mercedes E-Klasse 2002–2009

Change

Bolt pattern PCD 5x112 5 mounting holes on a 112 mm pitch circle

Centre bore DIA 66.6 millimetres

Wheel offset ET 37 mm

Fasteners M14x1.50 Bolt

Tightening torque 110 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

205/60 R16 92V7J×16, ET33220 / 240 kPa (2.2 / 2.4 bar; 32 / 35 psi)depends on version — check the placard
225/55 R16 95W7.5J×16, ET42220 / 240 kPa (2.2 / 2.4 bar; 32 / 35 psi)depends on the version — check against the plate
225/55 R16 95W8J×16, ET36depends on the version — check the placarddepends on the version — check the placard
245/45 R17 95W8J×17, ET38depends on the version — check the platedepends on the version — check the plate
245/40 R18 93Y (staggered setup on certain versions)front 8J×18, ET38; rear 9J×18, ET39depends on version — check the placarddepends on version — check the placard

Exact match: 5x112 and 66.6 mm

Show all