
Generation
Mercedes S-Klasse 1972–1980
Change
Bolt pattern PCD
5x112
5 mounting holes on a 112 mm pitch circle
Centre bore DIA
66.6
millimetres
Wheel offset
ET 30
mm
Fasteners
M12x1.50
Bolt
Tightening torque
—
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- 205/70R14
- 205/65R15
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- - Tyres: factory materials list 185 HR 14 and, on later/more powerful versions and in certain markets, 205/70 VR 14. The designations HR and VR indicate a radial tyre with speed category H or V; the load index is not specified in these older designations, so a modern index must not be assigned.
- - Wheels: 6J×14 is usually listed for these sizes; I cannot confirm the factory offset (ET) for all versions and years. Wheel size alone does not determine the pressure.
Vehicles with the same PCD and centre bore
146matchesExact match: 5x112 and 66.6 mm
- Alpina B3 2020–2025 ET 36
- Alpina B4 2022–present ET 25
- Alpina B5 2017–2024 ET 25
- Alpina B7 2016–2022 ET 25
- Alpina D3 2020–2022 ET 28…38
- Alpina D5 2017–2024 ET 25…41
- Alpina XB7 2020–present ET 36
- Alpina XD3 2018–2025 ET 25
- Alpina XD4 2018–2025 ET 25
- Audi E-Tron 2018–2023 ET 34
- BMW 1 Series Sedan 2017–2023 ET 54
- BMW 2 Series 2021–present ET 47