Generation

Mercedes S-Klasse 1991–1998

Change

Bolt pattern PCD 5x112 5 mounting holes on a 112 mm pitch circle

Centre bore DIA 66.6 millimetres

Wheel offset ET 46 mm

Fasteners M14x1.50 Bolt

Tightening torque —

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

225/60 R16 98W7.5J×16 ET51Front 210 kPa / 2.1 bar / 30 psi, rear 230 kPa / 2.3 bar / 33 psi
235/60 R16 100W8J×16 ET51Front 210 kPa / 2.1 bar / 30 psi, rear 230 kPa / 2.3 bar / 33 psi
255/45 ZR18 99Y — certain versions/markets8.5J×18 ET47The pressure for this combination cannot be reliably established from the available data — check the vehicle’s placard

Exact match: 5x112 and 66.6 mm

Show all