Generation

Toyota MR2 1989–1999

Change

Bolt pattern PCD 5x114.3 5 mounting holes on a 114.3 mm pitch circle

Centre bore DIA 60.1 millimetres

Wheel offset ET 45 mm

Fasteners M12x1.50 Nut

Tightening torque 103 N·m

Tyre pressure —

Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.

All tyre sizes

These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.

1989–1991, USA, coupé195/60R14 85H / 195/60R14 85H14×6J, ET45 / 14×6J, ET4526 psi (179 kPa; 1.79 bar) / 26 psi (179 kPa; 1.79 bar)
1991–1995, USA, coupé195/55R15 84V / 225/50R15 91V15×6J, ET45 / 15×7J, ET4526 psi (179 kPa; 1.79 bar) / 32 psi (221 kPa; 2.21 bar)
1991–1995, Europe, naturally aspirated version195/55R15 84V / 225/50R15 91V15×6J / 15×7J; offset depends on the configuration — not specified without a particular market/trimNot confirmed for all variants
1991–1995, Europe, Turbo195/55R15 84V / 235/45R16 90V15×6J / 16×7J; the exact offset depends on the versionNot confirmed for all variants
1991–1995, Japan, MR2 GT-S195/55R15 84V / 225/50R15 91V15×6J / 15×7JPressure depends on the specific vehicle’s placard
1995–1999, Japan, MR2 GT-S195/55R15 84V / 225/50R15 91V15×6J / 15×7JPressure depends on the specific vehicle’s placard

Exact match: 5x114.3 and 60.1 mm

Show all