Generation
Pontiac Trans Am 1992–2002
Change
Bolt pattern PCD
5x120.65
5 mounting holes on a 120.65 mm pitch circle
Centre bore DIA
70.3
millimetres
Wheel offset
ET 55
mm
Fasteners
M12x1.50
Nut
Tightening torque
—
Tyre pressure
—
Before buying: Match PCD and centre bore precisely. Also check wheel offset and width against your VIN.
All tyre sizes
- P235/55R16
- P245/50R16
- P275/40ZR17
Tyres and wheels by version
These options apply only to the stated years, markets and trim levels. Check the size against the vehicle placard and handbook before buying.
- For the 1994–2002 Trans Am, the factory tables usually list one size: P245/50R16 96S. This applies to the standard Trans Am, including GTA/WS6; no differences in size or pressure by market or year have been identified. The 2003 designation requires clarification: it is already a fourth-generation model year, but reliable factory data for it are not available here.
- 1994–2002P245/50R16 96S16×8″; offset not reliably established for all years/versions207 kPa / 2.07 bar / 30 psi front and rear
Vehicles with the same PCD and centre bore
61matchesExact match: 5x120.65 and 70.3 mm
- Buick Century 1977–1981 ET 0
- Buick Regal 1978–1987 ET 0
- Buick Regal 1973–1977 ET 0
- Buick Skylark 1975–1979 ET 0
- Buick Skylark 1968–1972 ET 0
- Cadillac Seville 1980–1985 ET 10
- Cadillac XLR 2003–2009 ET 61
- Chevrolet Bel Air 1977–1981 ET 0
- Chevrolet Bel Air 1964–1970 ET 0
- Chevrolet Bel Air 1960–1964 ET 0
- Chevrolet Bel Air 1958–1960 ET 0
- Chevrolet Bel Air 1957–1958 ET 0
